歡迎瀏覽全新 BOSE.HK
商店

Setting up your system

To set up the system, follow these steps:

  • On the audio input cable, insert the RCA plugs into the ZONE 1 jacks on the music center
  • Insert the 1/8" (3.5 mm) plug into the SERIAL DATA OUTPUT jack on the music center
  • On the opposite end of the audio input cable, insert the 5 pin plug into the AUDIO INPUT jack on the Acoustimass module
  • On one end of the speaker wires, insert the bare wires into the positive and negative terminals on each speaker cube
  • Insert the other end of the speaker wires into the speaker terminals labelled Outputs to Cube Speakers on the Acoustimass module
  • Connect the power cord for both the Acoustimass module and the music center to a working power outlet