歡迎瀏覽全新 BOSE.HK

Adjusting the display brightness

The system's display automatically adjusts to the light conditions in the room. This feature improves visibility of the display. It brightens when there's lots of light, then dims so it's less intrusive when the room darkens. You can also fine-tune the brightness of the display, to compensate for a very bright window, for instance.

To adjust brightness levels for high and low light conditions, follow these steps:

on the remote, press and hold alarm setup/menu until "setup menu" appears on the display

Alarm Setup/Menu

press tune/mp3 > five times until "bright hi" appears

Tune/MP3 >

press time - or time + button to set display brightness from 8 to 15 for high light conditions (factory setting is 12)

Time -

Time +

press tune/mp3 > once so "bright lo" appears

Tune/MP3 >

press time - or time + to set display brightness from 1 to 8 for low light conditions (factory setting is 4)

Time -

Time +

press the alarm setup/menu button to exit setup, or wait 10 seconds for setup to end automatically

Alarm Setup/Menu

此資訊是否有幫助?

多謝您的意見。歡迎在下方分享其他想法。
對於本網頁未能達到您的期望,我們深感抱歉。請與我們分享您的體驗及/或我們可以改善的地方。
遞交
非常感謝您提供的其他意見