The update application will require details from your CineMate® 1 SR system, (serial number and software version) before it can provide you with the correct update.
1. To retrieve this information, first power on your CineMate 1 SR system. The amber light on the Acoustimass® module should be solidly lit and not blinking.
2. Now take your available USB pen drive and insert it into the connector labelled "Service" on the rear of your Acoustimass module. The amber light should turn green and blink for several seconds, then go out. If the indicator light on the Acoustimass module does not change after inserting the pen drive, remove the thumb drive and reinsert it.
3. When the light goes out, remove the pen drive. Your CineMate 1 SR information is now available on the USB pen drive.
4. Now connect the thumb drive to your computer and continue to the software update by clicking below
5. Run the application