Back to article
3348
*Default setting shown. To modify the house code of the system, see Changing house code settings.
Default main room remote DIP switch settings
The switches in the battery compartment of your remote are used for different system configurations. If the switches are accidentally changed or need to return to their original position:
RC28 Zone 1 Remote DIP Switch Settings
Switch Label | Setting | Switch Function |
---|---|---|
1 | Down* | House code |
2 | Down* | House code |
3 | Down* | House code |
4 | Down* | House code |
5 | Down | Zone 2 |
6 | Up | Zone 1 |
7 | Down | Not used |
8 | Down | Not used |
9 | Down | Not used |
Was this article helpful?
Thank you for your feedback!