Using multiple Bluetooth connections

Ensure your earbuds are up to date with the latest firmware. See Updating the software or firmware of your product

To Enable Multipoint, in the Bose App go to Settings>Bluetooth Connections and Toggle "Multi-Point Connection" to On.

Please Note: From 10th July 2024, Multipoint will be enabled by default for any new units shipped or following a Factory Reset of an existing product.
 

To identify the connected device, press-and-hold the button on the earbud with the Switch Devices Shortcut. Release the button when the desired device name is announced.

To switch between connected devices:

1. Stop audio playback on the device currently playing.
2. Begin audio playback on the other device.

The earbuds can receive a phone call from either connected device, regardless of which device is playing audio.

1. In the Bose app , select your headphones or earbuds.
2. Tap on the Settings icon in the upper-right corner, then select Bluetooth Connections.
   
    
3. If the Multi-point Connection function is not enabled, as shown above, tap on the toggle switch to move the switch to the right.

When the Multi-point Connection function is enabled, you will be able to connect to two Bluetooth source devices at the same time.

To reconnect to a different device using the earbuds, you must set a shortcut to Switch Devices - see Customizing the touch control shortcut. 

1. Press and hold the button on the earbud assigned to switch devices.
   A voice prompt will first announce the name of the currently-connected device, followed by the names of the other devices in the previously paired to the earbuds
2. When you hear the name of the device you'd like to connect to, release the button.
   You will hear a tone that indicates when the device is connected.

You can also reconnect to a different device using the Bose app or by selecting the earbuds in the Bluetooth menu of the device you like to change to.